Discussion:
Printing Blank Pages
(too old to reply)
Moby
2008-01-04 00:23:00 UTC
Permalink
I am running a Lexmark Z45 printer with Windows 98SE and the printer has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?

Thanks

Moby
Cari (MS-MVP)
2008-01-04 03:14:35 UTC
Permalink
First thing to check is that there is enough ink in both cartridges. Even
if you're only printing black text, the color ink tank also needs ink (of
all 3 colors in it) for the black to work.

Then uninstall and reinstall the printer. Another thing to try is a change
of cable, if it's possible to use USB, do so.
--
Cari (MS-MVP) Printing & Imaging
www.coribright.com/windows
Post by Moby
I am running a Lexmark Z45 printer with Windows 98SE and the printer has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?
Thanks
Moby
Moby
2008-01-05 22:56:01 UTC
Permalink
Thanks Cari. I have done the uninstall/reinstall and there is ink in both
cartridges. I also purchased a new USB cable.

I connected and installed a different printer (Canon) as a test, and tried
to print. The exact same thing happened. The printer made all the noises
like it was printing the document, but the page ejected blank - absolutely no
marks ! Is it possible there is some setting within Windows 98SE which needs
to be changed ?
Post by Cari (MS-MVP)
First thing to check is that there is enough ink in both cartridges. Even
if you're only printing black text, the color ink tank also needs ink (of
all 3 colors in it) for the black to work.
Then uninstall and reinstall the printer. Another thing to try is a change
of cable, if it's possible to use USB, do so.
--
Cari (MS-MVP) Printing & Imaging
www.coribright.com/windows
Post by Moby
I am running a Lexmark Z45 printer with Windows 98SE and the printer has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?
Thanks
Moby
Moby
2008-01-05 23:03:00 UTC
Permalink
Thanks Cari. I have done the uninstall/reinstall and both cartridges have
ink. I also purchased a new USB cable.

I connected and installed a different printer (Canon), as a test and tried
to print. The exact same thing happened. The printer made all the noises as
if it was printing the document, but the page ejected blank with absolutely
no marks on it ! Is it possible that some setting within Windows 98SE needs
to be adjusted ?
Post by Cari (MS-MVP)
First thing to check is that there is enough ink in both cartridges. Even
if you're only printing black text, the color ink tank also needs ink (of
all 3 colors in it) for the black to work.
Then uninstall and reinstall the printer. Another thing to try is a change
of cable, if it's possible to use USB, do so.
--
Cari (MS-MVP) Printing & Imaging
www.coribright.com/windows
Post by Moby
I am running a Lexmark Z45 printer with Windows 98SE and the printer has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?
Thanks
Moby
Tom Ferguson
2008-01-07 17:32:34 UTC
Permalink
What application are you using to print? Try creating and printing a
document in Notepad. The document need not be long. Just one printable
character would be enough, for example.

Let us know.

Tom
MSMVP 1998-2007
Post by Moby
I am running a Lexmark Z45 printer with Windows 98SE and the printer has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?
Thanks
Moby
r***@shaw.ca
2008-01-14 23:11:32 UTC
Permalink
Post by Tom Ferguson
What application are you using to print? Try creating and printing a
document in Notepad. The document need not be long. Just one printable
character would be enough, for example.
Let us know.
Tom
MSMVP 1998-2007
Thanks. I'm not familiar with "Notepad" and not sure that I have it -
in looking at "Add/Remove Programs", I don't see it there. I did,
however, create a document in Microsoft Word and tried to print. The
same thing happened - printer made all the usual noises as if
operating O.K. - but ejects the page with nothing on it!
Post by Tom Ferguson
I am running a Lexmark Z45 printer with Windows 98SE and the printer has
Post by Moby
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?
Thanks
Moby- Hide quoted text -
- Show quoted text -
Tom Ferguson
2008-01-15 21:01:41 UTC
Permalink
I suggested Notepad to avoid the complexities introduced by printing from
complex word processors such as Word. Everyone has Notepad since it is
supplied with every version of Windows. Look in Start Programs Accessories.

Have a look in control Panel system Hardware Device Manager to see if
the USB port is marked with a red X or yellow !.
--
Tom
MSMVP 1998-2007
Post by Tom Ferguson
What application are you using to print? Try creating and printing a
document in Notepad. The document need not be long. Just one printable
character would be enough, for example.
Let us know.
Tom
MSMVP 1998-2007
Thanks. I'm not familiar with "Notepad" and not sure that I have it -
in looking at "Add/Remove Programs", I don't see it there. I did,
however, create a document in Microsoft Word and tried to print. The
same thing happened - printer made all the usual noises as if
operating O.K. - but ejects the page with nothing on it!
Post by Tom Ferguson
I am running a Lexmark Z45 printer with Windows 98SE and the printer has
Post by Moby
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?
Thanks
Moby- Hide quoted text -
- Show quoted text -
r***@shaw.ca
2008-01-21 17:33:22 UTC
Permalink
Post by Tom Ferguson
I suggested Notepad to avoid the complexities introduced by printing from
complex word processors such as Word. Everyone has Notepad since it is
supplied with every version of Windows. Look in Start Programs Accessories.
Have a look in control Panel   system   Hardware   Device Manager to see if
the USB port is marked with a red X or yellow !.
--
Tom
MSMVP 1998-2007
Post by Tom Ferguson
document in Notepad. The document need not be long. Just one printable
character would be enough, for example.
Let us know.
Tom
MSMVP 1998-2007
Thanks. I'm not familiar with "Notepad" and not sure that I have it -
in looking at "Add/Remove Programs", I don't see it there. I did,
however, create a document in Microsoft Word and tried to print. The
same thing happened - printer made all the usual noises as if
operating O.K. - but ejects the page with nothing on it!
 >I am running a Lexmark Z45 printer with Windows 98SE and the printer
has
Post by Tom Ferguson
Post by Moby
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?
Thanks
Moby- Hide quoted text -
- Show quoted text -- Hide quoted text -
- Show quoted text -
Tom - Thanks for following up on the problem I was having. The printer
is now working O.K. again. I appreciate it.

Moby
r***@shaw.ca
2008-01-21 17:33:52 UTC
Permalink
Post by Tom Ferguson
I suggested Notepad to avoid the complexities introduced by printing from
complex word processors such as Word. Everyone has Notepad since it is
supplied with every version of Windows. Look in Start Programs Accessories.
Have a look in control Panel   system   Hardware   Device Manager to see if
the USB port is marked with a red X or yellow !.
--
Tom
MSMVP 1998-2007
Post by Tom Ferguson
document in Notepad. The document need not be long. Just one printable
character would be enough, for example.
Let us know.
Tom
MSMVP 1998-2007
Thanks. I'm not familiar with "Notepad" and not sure that I have it -
in looking at "Add/Remove Programs", I don't see it there. I did,
however, create a document in Microsoft Word and tried to print. The
same thing happened - printer made all the usual noises as if
operating O.K. - but ejects the page with nothing on it!
 >I am running a Lexmark Z45 printer with Windows 98SE and the printer
has
Post by Tom Ferguson
Post by Moby
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?
Thanks
Moby- Hide quoted text -
- Show quoted text -- Hide quoted text -
- Show quoted text -
Tom - Thanks for following up on the problem I was having. The printer
is now working O.K. again. I appreciate it.

Moby

Loading...